Document regarding facades

Document

Document_Facades 

Elevation drawing 

Drawing

Exterior perspective drawing

Facade north/east and north/west

Facade southeast and southwest

Material description (hoveddokument)

Plan 1. etasje tegning

Plan 2. etasje tegning

Plan kjeller tegning

Section A-A and B-B drawing

Section C-C and D-D drawing

Georg Jens Greve (født 28. juli 1884 i Bergen, død 4. januar 1973 i Oslo) var en norsk arkitekt kjent for utarbeidelsen av reguleringsplanen etter bybrannen i Bergen i 1916 sammen med Albert Lilienberg. Greve er også den enkeltpersonen med størst innflytelse på utformingen av det moderne Bergen sentrum, som ble oppført i perioden 1920 til 1940. 

Source: https://no.wikipedia.org/wiki/Georg_Greve

Georg Greve

Geir Grung

"The building is based on the open office principle. The bosses sit closest to the core building, and the officials in the outer sector in one large room. In the middle is a conference room, canteen and dining room.

The round shape represents a very affordable solution, as the elements are mass-produced using a steel mold. The surface is aerated concrete. By sanding off the outer layer of concrete mud without getting down to the stone grains, you get a very robust and smooth surface. The wall itself is assembled from straight pieces; it is a light wooden wall with eternit parapet and steel plates on the inside to which the heating elements are attached. The glass is fixed in the top and bottom frame. There are only four opening windows on each floor, and only one aluminum clamping strip between the window units. The window construction is thus very reasonable.

Profilit glass is used on the lower floor. The entrance doors are made of tempered glass. The building is currently a combined office and industrial building. However, it is also calculated for the industrial production of electronic equipment. Therefore, it has been designed so that you can easily switch between office function and industrial use.

The construction cost was NOK 820/m² The building is approx. 4000 m."

Byggekunst Nr.8, 1965 ; Tema: Mening i arkitekturen

G. A. Ring AS: Ringbygget på Volvat

Commercial

Torshov Transformatorstasjon

Industrial

Residential

Skinnsenteret

Facade element

Cladding

"(...)  the elements are mass-produced using a steel mold. The surface is aerated concrete. By sanding off the outer layer of concrete mud without getting down to the stone grains, you get a very robust and smooth surface." 

Precast Concrete Facade Panel

Facade

- 40 steps, strung on a concret column
- as facade, polished concret
- visible aggregate
- probably prefab as well
- same company as facadelement: Interbygg A/S