Document regarding facades

Document

Document_Facades 

Elevation drawing 

Drawing

Except: Geir Grung arkitekten og hans verk

Book

"The building is based on the open office principle. The bosses sit closest to the core building, and the officials in the outer sector in one large room. In the middle is a conference room, canteen and dining room.

The round shape represents a very affordable solution, as the elements are mass-produced using a steel mold. The surface is aerated concrete. By sanding off the outer layer of concrete mud without getting down to the stone grains, you get a very robust and smooth surface. The wall itself is assembled from straight pieces; it is a light wooden wall with eternit parapet and steel plates on the inside to which the heating elements are attached. The glass is fixed in the top and bottom frame. There are only four opening windows on each floor, and only one aluminum clamping strip between the window units. The window construction is thus very reasonable.

Profilit glass is used on the lower floor. The entrance doors are made of tempered glass. The building is currently a combined office and industrial building. However, it is also calculated for the industrial production of electronic equipment. Therefore, it has been designed so that you can easily switch between office function and industrial use.

The construction cost was NOK 820/m² The building is approx. 4000 m."

Byggekunst Nr.8, 1965 ; Tema: Mening i arkitekturen

Excerpt: Byggekunst 1965, Nr.8

Journal

Exterior perspective drawing

Facade north/east and north/west

Facade southeast and southwest

Kodak-bygget, ground floor plan. Byggekunst 1981, nr 4, s. 199

First floor plan

Kodak-bygget, ground floor plan. Byggekunst 1981, nr 4, s. 198

Ground floor plan

Material description (hoveddokument)

Plan 1. etasje tegning

Plan 2. etasje tegning

Plan kjeller tegning

Kodak-bygget, second floor plan. Byggekunst 1981, nr 4, s. 199

Second floor plan

Kodak-bygget, section 6-7. Byggekunst 1981, nr 4, s. 199

Section 6-7

Section A-A and B-B drawing

Section C-C and D-D drawing

Kodak-bygget, section K-L. Byggekunst 1981, nr 4, s. 199

Section K-L

Kodak-bygget, site plan. Byggekunst 1981, nr 4, s. 198

Site plan

architecture and photography

Photo

Georg Greve

Geir Grung

G. A. Ring AS: Ringbygget på Volvat

Commercial

Per Høydahl

Kodak-bygget

Skinnsenteret

Office

Sun House

Torshov Transformatorstasjon

Industrial

Residential

Beam A

Beam

Beam B

Column

Fiberglass

Curved fiberglass roof

Roof section

Technological

tectonic

Aesthetic 

flexibility

Facade element

Cladding

"(...)  the elements are mass-produced using a steel mold. The surface is aerated concrete. By sanding off the outer layer of concrete mud without getting down to the stone grains, you get a very robust and smooth surface." 

Precast Concrete Facade Panel

Facade

- 40 steps, strung on a concret column
- as facade, polished concret
- visible aggregate
- probably prefab as well
- same company as facadelement: Interbygg A/S

Staircase(s)

Staircase

Arkitektene Greve og Grung 

Geir Grung

All entries related to Geir Grung

Elevation drawing

Facade north/east and north/west

Plan kjeller tegning

Ground floor plan

architecture and photography

Torshov Transformatorstasjon

Facade element

Document_Facades

Facade southeast and southwest

Section A-A and B-B drawing

Second floor plan

G. A. Ring AS: Ringbygget på Volvat

Beam A

Facade element

Excerpt: Byggekunst 1965, Nr.8

Material description (hoveddokument)

Section C-C and D-D drawing

Section 6-7

Kodak-bygget

Beam B

Precast Concrete Facade Panel

Document regarding facades

Plan 1. etasje tegning

Except: Geir Grung arkitekten og hans verk

Section K-L

Skinnsenteret

Column

Staircase(s)

Exterior perspective drawing

Plan 2. etasje tegning

First floor plan

Site plan

Sun House

Curved fiberglass roof